Dataprobe iBoot-G2 Specifications download pdf (Page 9)

V140506E iBoot-G2+ Page 9

5. Initial Configuration

The Device Management Utility (DMU), available

online at http://dataprobe.com/support/iboot.html,

provides the easiest means to find and configure

your iBoot-G2+ for use. It can discover all the

iBoots on your network, display the current IP

address of each, and allow setting of any valid IP

address.

Install and Run the DMU

1. Download DMUSetup.exe

2. Run DMUSetup.exe

3. Run the DMU

Note: The IP address can only be set within the

first two minutes of powering up the iBoot. The

DMU will only work with iBoots on the same

physical subnet as the PC.

Once the DMU is run, click on Device | Discover

to display all the iBoots on your network. The

DMU will display the Location Name of the iBoot,

the product ID and Version Number, the current

IP Address, and the MAC Address. Factory

defaulted iBoots will display with the name New

iBoot-G2+ and have the factory default IP

address of 192.168.1.254. If the IP address was

assigned by a DHCP server, no changes to the IP

Address are required.

The IP address field also indicates the port for

web access that is used by the iBoot. The

standard port for web browser control is factory

default Port 80.

Change the IP Address

1. Click on the row containing the iBoot-G2+ to

be set. The row will become highlighted.

2. From the menu select Set | IP Address

3. Enter the new IP Address into the form. Click

OK when done.

4. A confirmation box is displayed. Click OK to

clear the box.

Once the IP Address is set, other all other

operational features of the iBoot-G2+ can be set up. Click on Discover again to refresh the display, highlight

the desired iBoot-G2+ and click on Manage | Launch Browser. Follow the instructions on Page 14 to configure

the iBoot.

The DMU can also be used to return an iBoot-G2+ to its Factory Default condition. This can be used to

recover an iBoot-G2+ with a lost password. Highlight an iBoot-G2+ from the display and select Set | Factory

Defaults. This must also be done within the first two minutes of powering up the iBoot.

DMU Discovers Dataprobe Devices

on Local Network

Enter New IP Address for iBoot

IP Address Successfully Set

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 36 37

Comments to this Manuals

No comments

Dataprobe iBoot-G2 Specifications Page 9

Comments to this Manuals

Related products and manuals for Network switches Dataprobe iBoot-G2