Dataprobe iBoot-G2 Specifications download pdf (Page 26)

V140506E iBoot-G2+ Page 26

9. Command Line Interface

The iBoot-G2+ Command Line Interface (CLI) provides a text based method for communicating with the iBoot.

The syntax of the CLI uses a basic Set (change a variable) and Get (retrieve a variable). The CLI is accessed

either through the Telnet protocol, which requires a Telnet client program, or via USB which requires a serial

communications program like Hyperterminal. Dataprobe also provides a simple terminal program (EZ Term) at

http://dataprobe.com/support/iboot.html.

9.1. CLI Access

Via Telnet

Open the Telnet client and connect to the IP address set for the iBoot.

Via USB

Open the console client and connect to the COM port assigned to the iBoot-G2+. The communications

parameters are: 9600bps. 8 data bits. No parity. 1 Stop bit. No Flow Control. Once the connection is made,

send Enter.

The CLI uses the same security options as the web browser. See section 7.12 for an explanation of the

options for user setup and security.

When connection is successful, the User> prompt is displayed. Enter user or admin and press Enter. The

prompt will change to Password>. Enter the admin or user password and press Enter. The prompt will change

to iBoot>. This indicates successful login. Enter commands as needed. When done, enter the logout

command.

9.2. iBoot-G2+ CLI Syntax

Command

Description

Factory

Default

Control Commands

These commands are used to monitor and control the outlet.

set <main | exp1 | exp2> <on | off | cycle>

This command controls the main outlet, Exp1 or Exp2

For Exp1 and Exp2; on = Closed , off = Open

get outlets

get status

This command returns the current status of the main

and expansion outlets. The response to this command

is determined by the expansion mode setting.

If iBoot-Exp or Power Control mode:

Main Outlet: On

Exp 1: On L (L indicated Locked to Main)

Exp 2: Off

If Independent I/O mode:

Main Outlet: On

Exp1:

Input: Open

Output: Closed

Exp2:

Input: Open

Output: Open

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 36 37

Comments to this Manuals

No comments

Dataprobe iBoot-G2 Specifications Page 26

Comments to this Manuals

Related products and manuals for Network switches Dataprobe iBoot-G2