Dataprobe iBoot-G2 Specifications download pdf (Page 6)

V140506E iBoot-G2+ Page 6

4.3. Expansion Connections

iBoot-G2+ has two Expansion Ports, Exp1 and Exp2 for connection to iBoot-Exp, or for use as General

Purpose Inputs and Outputs (GPIO). Mode settings on the iBoot-G2+ determine how the expansion ports

function.

Connections to the iBoot-Exp are made using screw terminal blocks. The screw terminal blocks are on

removable connectors for easy cable fabrication.

Make sure screw terminals are tightened securely and that there are no loose strands of cable, or excessive

stripped wires.

Connecting to iBoot-Exp

Terminal blocks are connected pin-to-pin with the iBoot-Exp as shown:

Connect:

Function

iBoot-G2+

iBoot-Exp

Power

V+ Power Out

V+ Power In

Feedback

I Input

O Output

Ground

G Ground

Command

O Output

I Input

Expansion units (iBoot-Exp) are shipped with a cable for easy connection to the iBoot-G2+ . Maximum cable

length is 1000 ft (305 m) using 22 AWG wire.

iBoot-G2+ to iBoot-EXP Connections

Poor Screw Terminal

Connections.

Note Loose Wires and

Excessive Stripping

Proper Screw Terminal

Connections

1 2 3 4 5 6 7 8 9 10 11 ... 36 37

No comments

Dataprobe iBoot-G2 Specifications Page 6