Dataprobe iBoot-G2 Specifications download pdf (Page 6)

V140602E iBoot-DC Page 6

4.1. Other ways to set the IP Address

1. Automatically from a DHCP Server

2. Web Browser via the Set-up Page

3. Command Line Interface (Telnet)

iBoot-DC comes with factory installed IP address 192.168.1.254.

Setting the IP address from a DHCP Server

A DHCP server will automatically assign an IP address (dynamic address) as well as Subnet Mask and

Gateway to the iBoot-DC. If you reboot the iBoot-DC with the IP Mode set for DHCP, the DHCP server will

be able to assign an IP address. Once an IP address is assigned, you must check the DHCP server or

use the iBoot-DC DUM to see what address is assigned to the iBoot. You can lock the iBoot-DC to the

current address, by selecting IP Mode = Static without changing the addresses. Set the IP Mode either by

using the web setup page, or via Telnet commands.

Setting the IP address using Web Browser

To set the IP address using a Web Browser, connect the Ethernet connection to your local network and

apply power to iBoot.

Open your browser and access iBoot-DC by entering the default (192.168.1.254) or current IP address into

your browser's Address window. Enter the administrator credentials, click on Setup and follow the

instructions on Page 10.

1 2 3 4 5 6 7 8 9 10 11 ... 23 24

No comments

Dataprobe iBoot-G2 Specifications Page 6