Dataprobe iPIO-8 Operation Manual User Manual

Technical Support: 201-934-5111Main: [email protected]: dataprobe.com Overview The iPIO-8 is a network attached, IP addresse

iPIO-8 Page 10 Multiple inputs on the local iPIO-8 can control the same relay on the remote unit. In this case, the remote relay will swit

iPIO-8 Page 11 Using remote setup for your application Application 1. Bidirectional Relay Transport In this application, two iPIO-8 units

iPIO-8 Page 12 Firmware Upgrades The iPIO-8 can be field upgraded. Find the latest version or special purpose versions at http://dataprobe.c

iPIO-8 Page 13 Specifications Physical 5.25"W x 5.5"D x 1.75"H (13.3 x 14.0 x 4.5 cm) Environmental Temperature 0 - 70 De

iPIO-8 Page 14 TECHNICAL SUPPORT, RETURNS and WARRANTY Seller warrants this product, if used in accordance with all applicable instructions,

iPIO-8 Page 2 Hardware Installation Inputs Connect the inputs to the iPIO-8 using the screw terminals. Inputs can be either dry relay or sw

iPIO-8 Page 3 Power supply The iPIO is provided with a wall mounted power supply, item 1930075. This power supply is provided with four p

iPIO-8 Page 4 Output The iPIO-8 has eight LED indictors, displaying the status of the Relay Outputs. LED OFF Relay Open LED ON Relay C

iPIO-8 Page 5 WEB Page Access The web pages provide status information on the inputs and outputs of the iPIO-8, as well as provide configura

iPIO-8 Page 6 Configuration Access to the Setup requires administrator rights. The setup section is divided into seven sections, Device,

iPIO-8 Page 7 Secure Sockets Layer (SSL) To restrict web access to secure, encrypted pages, select SSL. Click Save and then Reboot when pro

iPIO-8 Page 8 Destination 1 & 2. Set up to two email addresses to receive notifications. Send Email on Change. Select which type of ev

iPIO-8 Page 9 Relay Setup Each of the eight relays is represented by a tab with its name. Click on the tab to access the setup parameters f