Dataprobe iBoot-G2 Specifications download pdf (Page 8)

iboot-g2_v140219e iBoot-G2 Page 8

6. Web Browser Operation

6.1. Password Protection

iBoot-G2 uses two username/password credential sets, one for power

control only (User) and one that also provides access to the setup

functions (Admin). This configuration can be changed to require

Administrator credentials at all times or allow unsecured User level

control. See section 7.12.

Default Credentials:

Role

Username (fixed)

Password (settable)

Administrator

admin

User

user

Open your browser and enter the IP address of iBoot-G2 into the address bar. If you have changed the IP

address by any of the methods described, enter that address, otherwise, use the default IP address

192.168.1.254

Enter the username and password when prompted. When the proper username/password is received the

Control and Status Page is displayed.

iBoot-G2 uses an inactivity timer for security. This timeout is user selectable from 0 to 99 minutes.

Setting to zero disables the timeout feature. When there is no activity for the set time in minutes, the user

is automatically logged out and the username and password will need to be entered again for access. This

is to prevent accidental lockout by leaving the user logged in.

As the iBoot-G2 allows only one Web user logged in at any time, use caution when disabling the

timeout feature, as it is possible to lock out other users by forgetting to logout. Closing the

browser will not log the user out and will lock out web access. If you do become locked out,

access the iBoot-G2 via Telnet and reboot the unit, or press the reset button (see Section 11).

6.2. Mobile Browser Support

The standard web pages illustrated in this manual are for

screen sizes 700 pixels wide and greater. For devices with

screen widths below 700 pixels, the iBoot-G2 uses a set of

mobile browser pages. The iBoot-G2 automatically detects the

screen size and redirects automatically to the mobile pages.

The mobile pages do not support the setup functions. To

access the setup functions, or to view the full desktop site, click

on the Full Site button.

Enter Username and Password

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 24 25

No comments

Dataprobe iBoot-G2 Specifications Page 8